PN-S8252-48P-800
48-port L3 Managed Gigabit PoE+ switch (ports 1 – 4 support PoE++ up to 90W), 4x 10G SFP+ uplink ports, 176 Gbps switching capacity, 800W power budget
Description
This blazing fast switch has 48 of 10/100/1000Base-T ports and 4x 10G SFP+ ports for transmitting data at extreme speeds. It’s also a layer-3 managed switch, allowing you to route packets between different subnets and manage your network effectively. Ports 1-4 can supply up to 90W of power (PoE++) to devices, while ports 5-48 deliver up to 30W for regular IP cameras, phones, and access points.
This switch is useful as the backhaul of a wired network, allowing you to bridge long distances with fiber cable while also supplying power for PoE cameras.
All Petenet switches have a neat toggle switch that allows you to activate four functions:
- VLAN: Ports 1-48 will be unable to communicate with each other. They can only pass data to the uplink port.
- Extend: Ports 1-4 can transmit power and data up to 250m over Cat5e or Cat6 cable – however the network speed of these ports are reduced to 10 Mbps.
- Watchdog: If a network port has a data link for 2-3 minutes WITHOUT data transmission, the port will automatically reboot. This will attempt to reboot and fix the camera’s connectivity issue.
- QOS: The ports with a yellow colour underneath will have a higher priority than other ports. This is helpful if these ports are used to connect Wireless APs or directly to a computer.
