-
- Accessories, Uniview Camera Accessories
PWR-DC12-350A-IN
- This is a power supply for Uniview 64ch and 128ch NVRs. It can be used as a redundant power supply, ensuring that your system is operational in the event that the original power supply stops working.
- Login for pricing
-
- Accessories, Uniview Camera Accessories
TR-JB07-D-IN-BK
- This square metal junction box is compatible with Uniview bullet cameras (IPC23xx series) and TR-WM03 series wall brackets. There are two holes at the bottom with 3⁄4-inch NPT thread for connecting to conduit.
- Login for pricing
-
- Signal Extenders
XLR-ACC-HDMI-EXTENDER-60M
- This plug-and-play HDMI Extender transmits high-resolution 1080p video and audio up to 196ft (60m) over a single CAT6 LAN cable. It offers zero video latency, making it ideal for both indoor and outdoor applications like video conferencing, presentations, and home theaters.
- Login for pricing
-
- Accessories
XLR-ACC-MIFARE-CARD
- A MIFARE classic card, preloaded with unique 4 byte ID, ISO/IEC 14443-A compliant. Tested working with Uniview's Intercom Kit – allows you to open the door by tapping the card within two-inches of the reader.
- Login for pricing
-
- Accessories
PN-PD1001H-I
- This devices takes incoming PoE++ (up to 90W) and splits in into selectable (5V, 9V, 12V, or 24V) DC output with two positive and negative terminal blocks, while also allowing for passthrough PoE output. This allows you to power up non-PoE devices such as switches and routers while still powering up a PoE camera or IP phone.
- Login for pricing
-
- Accessories
PN-PD1001T
- This selectable PoE splitter allows you to split incoming 48V PoE into 5V / 9V / 12V / 18V DC and Ethernet (for data). This allows you to power devices that do not natively accept PoE, such as routers and switches.
- Login for pricing
-
- Accessories
PN-PD101L
- Waterproof PoE Splitter
- Login for pricing
-
- Accessories, Signal Extenders
PN-E7005-4P-60
- Four channel PoE++ splitter. Takes a 1 PoE++ input and splits it into 4 PoE+ ports, up to 25W of power at 100M.
- Login for pricing
-
- Accessories, Signal Extenders
PN-FS-E7002-1P-25
- Gigabit PoE+ Ethernet Port
- Login for pricing
-
- Signal Extenders
PN-E7002-1P-25
- This is an indoor PoE+ extender, allowing you to increase the maximum distance of a Cat5e or Cat6 run by an additional 100 metres. After extending the signal, the maximum power will be 25W at 100m.
- Login for pricing
-
- Accessories
PN-PSE101H+
- This is a PoE++ injector that supplies up to 90W of power to your devices. This makes it suitable for high-end PTZ cameras or enterprise-grade wireless access points. There are also LED indicators that show when the injector is drawing 0-30W, 30-60W, or 60-90W of current.
- Login for pricing
-
- Accessories
PN-PSE101HN
- This is a 60W PoE+ injector – perfect for powering security cameras, wireless access points, or PTZs. It supports a maximum bandwidth of 1 Gbps which is sufficient for today’s networking equipment.
- Login for pricing
Accessories